State:

File:  (SD)
Timelapse:

Approx. Total Print Time:

Print Time:
Print Time Left:
Printed:
Free: / Total:
Create folder...
Upload
Hint: You can also drag and drop files on this page to upload them.
Actual Target Offset

Webcam stream loading...

Webcam stream not loaded

It might not be configured correctly or require authentication. To have this fixed, get in touch with an administrator of this OctoPrint instance.

It might not be configured correctly or require authentication. You can change the URL of the stream under "Settings" > "Webcam & Timelapse" > "Stream URL". If you don't have a webcam just set the URL to an empty value.

Currently configured stream URL:

Keyboard controls active
/ : X Axis +/-
/ : Y Axis +/-
W, Page↑ / S, Page↓: Z Axis +/-
Home: Home X/Y
End: Home Z
1, 2, 3, 4: Stepsize 0.1, 1, 10, 100mm
Hint: If you move your mouse over the picture, you enter keyboard control mode.

Model info

Layer info

Renderer options

Note that the time and usage values in this tab are estimated by the GCODE viewer in your browser and might differ from the values estimated by the server that are displayed in the "State" and "Files" panels in the sidebar due to slightly different implementations. Also note that these estimated values may be inaccurate since they can also take information present in the GCODE file into account.

Warning

You've selected for printing which has a size of . Depending on your machine this might be too large for rendering and cause your browser to become unresponsive or crash.

Are you sure you want to visualize this file nevertheless?

Scroll to end | Select all

If acknowledgements ("ok"s) sent by the firmware get lost due to issues with the serial communication to your printer, OctoPrint's communication with it can become stuck. If that happens, this can help. Please be advised that such occurences hint at general communication issues with your printer which will probably negatively influence your printing results and which you should therefore try to resolve!

Some functionality of the terminal will be disabled if OctoPrint detects that your browser is too slow for that. You may force it back on here, but be aware that this might make your browser unresponsive.

Take note that timelapse configuration is disabled while your printer is printing.

Timelapse Configuration

Warning Do not use with spiralized ("Joris") vases or similar continuous Z models. Note Does not work when printing from the printer's SD Card (no way to detect the change in Z reliably). Use "Timed" mode for those prints instead.
sec
fps
sec
mm
Enter the retraction z-hop used in the firmware or the gcode file to trigger snapshots for the timelapse only if a real layer change happens. For this to work properly your retraction z-hop has to be different from your layerheight!
You have unsaved changes.

Finished Timelapses

Name Size Action
 | 
Name Frames Size Action
 | 

Upload

Server is offline

Attempt to reconnect

Please reload

There is a new version of the server active now, a reload of the user interface is needed. This will not interrupt any print jobs you might have ongoing. Please reload the web interface now by clicking the button below.